1-1.5mA measuring current; 40-50 uA standby current
Good for 0-100% humidity readings with 2-5% accuracy; Good for -40 to 80°C temperature readings ±0.5°C accuracy
No more than 0.5 Hz sampling rate (once every 2 seconds) Body size 27mm x 59mm x 13.5mm (1.05″ x 2.32″ x 0.53″)
4 pins, 0.1″ spacing
Low cost; 3 to 5V power and I/O; 2.5mA max current use during conversion (while requesting data)

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Enter the code in the box below

OkaeYa DHT22 Digital Temperature and Humidity Sensor Module

Qty